KONICA MINOLTA PRINTER - MAC SETUP INSTRUCTIONS

STEP 1---Driver Installation:

  • Insert USB flash drive into your MAC
  • Open the “MAC DRIVER UNZIPPED” folder click on the PKG file
    • If your computer has a pop up that asks if you want to allow this app to make changes to your MAC, select “YES”
  • Select “CONTINUE” 3 times and then select “AGREE”
  • Select the destination you want the printer installed to. Normally this would be “Macintosh HD”
  • Select Continue and then select install.
    • Enter your computer credentials to allow the driver to properly install on your computer
  • Close the installer
  • On your Task Bar, select “LAUNCHPAD” and go to “SYSTEM PREFERENCES”
    • Select “PRINTERS & SCANNERS”
    • On the printers list select the “+” button to add a new printer
    • Select the IP option tab
    • Type in “10.1.50.42” in the Address section
      • Under “Use” in the dropdown box choose “SELECT SOFTWARE”
      • Type in “Konica Minolta C364” and select “OK”
  • Close out of System Preferences and follow the authentication setup below

STEP 2---Authentication Setup:

  • Open Chrome and go to any webpage
  • Press “COMMAND+P” to print the webpage
  • DO NOT CLICK PRINT
    • On the bottom of the print page you will see “Print Using System Dialog” select this option----you will need to do this every time you print from a MAC
  • On the System Dialog under Orientation you will see “Layout”, click the dropdown box
  • Select “OUTPUT METHOD”
  • Select “ACCOUNT TRACK”
  • Enter in your password (last 7 digits of your phone number) and select “OK”
  • When ready to print, select “PRINT”

The printer is now setup on your computer.  When you select print, be sure to select the “KONICA MINOLTA” printer or whatever you rename the printer to.  You will be asked to authenticate before printing, your password is the password given to you by the DW staff.  If you have any questions, please email support@downtownworks.com or visit us at the front desk!